ASW Asphalt Profi-Thermo
ASS 477 | Body/Thermal
| Body/Thermal | Standard | Option |
|---|---|---|
| Body with projection + telescoping 7740 - 7730x2370x1400mm, highly wear-resistant steel 400-450 HB, approx. 27.5 m³ slightly heaped* / approx. 25 m³ unheaped *Note: The load volume may be slightly reduced when using a tarpaulin Body with projection + telescoping 7740 - 7730x2370x1400mm, highly wear-resistant steel 400-450 HB, approx. 27.5 m³ slightly heaped* / approx. 25 m³ unheaped *Note: The load volume may be slightly reduced when using a tarpaulin | X | |
| 5mm base plate, 4mm side panels | X | |
| 6mm base plate, 4mm side panels | O | |
| 8mm base plate, 6mm side panels, reinforced body | O | |
| Thermo Push sliding unit type 3000 A - nova grey Sliding floor made from highly wear-resistant steel 400-450 HB Wear- and heat-resistant scrapers Thermo Push sliding unit type 3000 A - nova grey Sliding floor made from highly wear-resistant steel 400-450 HB Wear- and heat-resistant scrapers | X | |
| ... 40 with tarpaulin, ASS moving panel type 1350 - 1250 A (required for tarpaulin) | X | |
| Standard body painting in RAL 7035 light grey (inside of body primed only) | X | |
| Body painting according to RAL ........ (inside of body primed only) | O | |
| Special body painting in RAL 9006/9007 (inside of body primed only) Attention: Metallic truck colours NOT available! Special body painting in RAL 9006/9007 (inside of body primed only) Attention: Metallic truck colours NOT available! | O | |
| 2-part hydraulic rear panel | X | |
| 3-way control block for additional hydraulic functions, e.g. tarpaulin, attachments, axle adjustment, etc. (3 x DW NG 10, 24 V, continuous current on PIN 9 of 15-pin connector / PIN 4 of 7-pin connector), pressure line NW16, return line NW 20 with screw coupling, without truck installation (hydraulic system on truck with size 6 HDK screw couplings, 200 bar supply line and pressure-free return required) 3-way control block for additional hydraulic functions, e.g. tarpaulin, attachments, axle adjustment, etc. (3 x DW NG 10, 24 V, continuous current on PIN 9 of 15-pin connector / PIN 4 of 7-pin connector), pressure line NW16, return line NW 20 with screw coupling, without truck installation (hydraulic system on truck with size 6 HDK screw couplings, 200 bar supply line and pressure-free return required) | X | |
| ProSave control with remote control and additional operation on vehicle (art. no. 534740) - The rear panel can only be closed when the sliding floor is in loading position. - Dead-man switch for partial unloading (note instructions for two-button operation) ProSave control with remote control and additional operation on vehicle (art. no. 534740) - The rear panel can only be closed when the sliding floor is in loading position. - Dead-man switch for partial unloading (note instructions for two-button operation) | X | |
| Can of refinishing paint in body colour | X | |
| Thermal sliding tarpaulin, type Cabriole-ADR, mechanically controllable from the ground | X | |
| Thermal sliding tarpaulin, type Cabriole-ADR, 24 V electric drive with remote control (does not work with soiled loading sill), with NATO socket on trailer, without connecting cables. NATO socket required on semitrailer tractor, secured with min. 70 A (not included with delivery). Thermal sliding tarpaulin, type Cabriole-ADR, 24 V electric drive with remote control (does not work with soiled loading sill), with NATO socket on trailer, without connecting cables. NATO socket required on semitrailer tractor, secured with min. 70 A (not included with delivery). | O | |
| Paver brake, current on PIN 15 of 15-pin connector / PIN 5 of 7-pin connector | X | |
| Thermal pack Side walls, body floor, bulkhead and rear panel thermally insulated - Planked with aluminium plates and painted - Fliegl Isotherm, complete moisture resistance, NO water absorption, high-temperature resistance (continuously over 200°C), dimensionally stable - Side walls up to 70 mm thick, body floor with up 120 mm thick insulation - "Asphaltprofi-Thermo" sticker with graphic - Manufacturer certificate for thermal vehicles - Bolted centring plates on rear panel for paver operation - 4x mechanical temperature indicators on side walls acc. to ARS temperature-controlled vehicles 10/013 | X | |
| Spiral connecting cable for sliding tarpaulin, with NATO connectors at both ends | O | |
| FCT digital temperature measurement system: with Bluetooth printer and iOS app, autom. data documentation + transfer acc. to ARS temperature-controlled vehicles 10/013, requires activation of the FMS interface in the truck (the customer must provide a telematics system for the data transmission). List of suitable telematics systems available on request Additional cost to analogue temperature display | O | |
| Bolted discharge chute for asphalt: (for filling wheelbarrows and road construction, with high centring plates) Attention: These must be removed for excavated earth and gravel. | O |