DMA 1400 Duplex Profi | Equipment

Equipment Standard Optional
24.2 kW electric drive, with switch X  
Agitating tools, sprung, adjustable X  
Slider opening at front centre X  
Electromagnetic control valve for hydraulic slider opening X  
1 1/2" water supply with ball valve X  
Filling chute with safety grid and safety switch, hydraulically folding (1) X  
Tank primed and painted with 2-component orange lacquer X  
Special painting of tank acc. to RAL ....   O
Tank primed   O
Rain shield for control cabinet X  
Frequency inverter for main drive (maximum mixer performance with different materials) X  
Height-adjustable supporting feet with forklift mounting X  
DigiTouch Bio weighing system
Programming of recipes consisting of multiple components.
The filling weight of the raw material (gravel, rock, etc.) is measured and the required quantity of additional components determined automatically.
Components (gravel, sand, grit, water, cement) based on weight, all hoppers controlled via contactors.
Display with LED backlight, simple user navigation.
Automatic overrun correction, USB diary.
Connections facility for remote control via PC on the switch cabinet, with switch cabinet heating. DigiTouch Bio weighing system
Programming of recipes consisting of multiple components.
The filling weight of the raw material (gravel, rock, etc.) is measured and the required quantity of additional components determined automatically.
Components (gravel, sand, grit, water, cement) based on weight, all hoppers controlled via contactors.
Display with LED backlight, simple user navigation.
Automatic overrun correction, USB diary.
Connections facility for remote control via PC on the switch cabinet, with switch cabinet heating
X  
Remote control receiver and transmitter with 8 buttons for mixer control X  
Large additional display for weighing system
Easily visible from distance; 84-digit display with red numbers
X  
Solenoid valve for automatic water supply (only in combination with weighing system) X  
Electrical preparation for cement auger (up to 5.5 kW) X  
Electrical preparation for conveyor belt (up to 5.5 kW) X  
Remote control of weighing system possible via PC with Ethernet, without connecting cable and without installation X  
Operator platform with ladder   O
Cement auger 5 m, D 193 with electric drive, art. no. 443662   O
Belt conveyor 7000 mm:

- Length 7000mm, belt width 800mm
- Frame with manual height selection (2400 to 3200mm)
- Feed hopper with rubber lining
- Self-regulating scraper
- Support wheel
  O
Belt conveyor 10000 mm:

- Length 10000mm, belt width 800mm
- Frame with manual height selection (3200 to 4000mm)
- Feed hopper with rubber lining
- Self-regulating scraper
- Support wheel
  O
Cladding, replaceable, made from highly wear-resistant steel 400-450 HB   O
Gravel container with feeder belt for each hopper   O
Commissioning and assembly of mixing unit at customer site per hour of work (excl. crane and travel costs)   O
Pump for retarder supply, incl. electrical preparation   O
Pump for flux supply, incl. electrical preparation   O
WLAN package:
- Incl. WLAN access point
- Access point installation
- Separate iOS or Android APP required (third-party APP):

ONLY POSSIBLE WITH WLAN PACKAGE OR ON-SITE WLAN
  O